? semiconductor components industries, llc, 2007 june, 2007 - rev. 2 1 publication order number: mbrs2h100/d MBRS2H100T3G surface mount schottky power rectifier smb power surface mount package this device employs the schottky barrier principle in a metal-to-silicon power rectifier. features epitaxial construction with oxide passivation and metal overlay contact. ideally suited for low voltage, high frequency switching power supplies; free wheeling diodes and polarity protection diodes. features ? compact package with j-bend leads ideal for automated handling ? highly stable oxide passivated junction ? guard-ring for overvoltage protection ? low forward voltage drop ? this is a pb-free device mechanical characteristics ? case: molded epoxy ? epoxy meets ul 94 v-0 @ 0.125 in ? weight: 95 mg (approximately) ? cathode polarity band ? lead and mounting surface temperature for soldering purposes: 260 c max. for 10 seconds ? finish: all external surfaces corrosion resistant and terminal leads are readily solderable ? esd ratings: machine model = b, human body model = 3b ? device meets msl1 requirements maximum ratings rating symbol value unit peak repetitive reverse voltage working peak reverse voltage dc blocking voltage v rrm v rwm v r 100 v average rectified forward current i o 2.0 a non-repetitive peak surge current (surge applied at rated load conditions halfwave, single phase, 60 hz) i fsm 130 a storage temperature range t stg -65 to +175 c operating junction temperature (note 1) t j -65 to +175 c stresses exceeding maximum ratings may damage the device. maximum ratings are stress ratings only. functional operation above the recommended operating conditions is not implied. extended exposure to stresses above the recommended operating conditions may affect device reliability. 1. the heat generated must be less than the thermal conductivity from junction-to-ambient: dp d /dt j < 1/r ja . device package shipping ? ordering information smb case 403a plastic MBRS2H100T3G smb (pb-free) 2500 / tape & reel schottky barrier rectifier 2.0 amperes, 100 volts http://onsemi.com ?for information on tape and reel specifications, including part orientation and tape sizes, please refer to our t ape and reel packaging specifications brochure, brd8011/d. marking diagram b210 = specific device code a = assembly location y = year ww = work week = pb-free package (note: microdot may be in either location) ayww b210
MBRS2H100T3G http://onsemi.com 2 thermal characteristics characteristic symbol value unit thermal resistance, junction-to-lead (note 2) thermal resistance, junction-to-ambient (note 3) r jl r ja 14 71 c/w electrical characteristics characteristic symbol value unit t j = 25 c t j = 125 c maximum instantaneous forward voltage (note 4) (i f = 2.0 a) v f 0.79 0.65 v maximum instantaneous reverse current (note 4) (v r = 100 v) i r 0.008 1.5 ma 2. mounted with minimum recommended pad size, pc board fr4. 3. 1 inch square pad size (1 x 0.5 inch for each lead) on fr4 board. 4. pulse test: pulse width 250 s, duty cycle 2.0%. typical characteristics figure 1. typical forward voltage figure 2. maximum forward voltage v f , instantaneous forward voltage (v) v f , instantaneous forward voltage (v) 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 1 10 100 1.5 1.3 1.1 0.9 0.7 0.5 0.3 0.1 1 10 100 figure 3. typical reverse current figure 4. maximum reverse current v r , reverse voltage (v) v r , reverse voltage (v) 90 80 60 50 30 20 10 0 0.00001 0.0001 0.001 0.01 0.1 1 10 90 80 60 50 30 20 10 0 0.001 0.01 0.1 1 10 i f , forward current (a) i f , forward current (a) i r , reverse current (ma) i r , reverse current (ma) 1.2 1.1 1.0 150 c 125 c 25 c 150 c 125 c 25 c 40 70 100 150 c 125 c 25 c 40 70 100 150 c 125 c 25 c
MBRS2H100T3G http://onsemi.com 3 typical characteristics figure 5. typical capacitance figure 6. current derating - lead v r , reverse voltage (v) t c , case temperature ( c) 80 70 60 50 30 20 10 0 0 50 100 150 200 300 400 450 135 130 125 120 115 110 105 100 0 1.0 2.0 3.0 4.0 figure 7. current derating, ambient, per leg c, capacitance (pf) i f(av) , average forward current (a) 40 90 100 250 350 t j = 25 c f = 1 mhz dc square wave i f(av) , average forward current (a) 5 4 3 2 1 0 0 1 2 3 4 5 p f(av) , average power dissipation (w) t j = 150 c dc square wave 140 145 150 figure 8. maximum forward power dissipation t a , ambient temperature ( c) 150 125 100 50 25 0 0 1.0 2.0 3.0 4.0 i f(av) , average forward current (a) r ja = 71 c/w dc 75 dc r ja = 100 c/w no heatsink 0.1 0.00001 pulse time (s) 100 10 0.1 0.01 0.001 0.0001 0.001 0.01 1.0 10 100 0.000001 50% (duty cycle) 20% 10% 5.0% 2.0% 1.0% single pulse 1000 r(t) (c/w) figure 9. thermal response, junction-to-case 1.0 square wave
MBRS2H100T3G http://onsemi.com 4 package dimensions smb case 403a-03 issue f e b d c l1 l a a1 notes: 1. dimensioning and tolerancing per ansi y14.5m, 1982. 2. controlling dimension: inch. 3. d dimension shall be measured within dimension p. 2.261 0.089 2.743 0.108 2.159 0.085 mm inches scale 8:1 *for additional information on our pb-free strategy and soldering details, please download the on semiconductor soldering and mounting techniques reference manual, solderrm/d. soldering footprint* dim a min nom max min millimeters 1.90 2.13 2.45 0.075 inches a1 0.05 0.10 0.20 0.002 b 1.96 2.03 2.20 0.077 c 0.15 0.23 0.31 0.006 d 3.30 3.56 3.95 0.130 e 4.06 4.32 4.60 0.160 l 0.76 1.02 1.60 0.030 0.084 0.096 0.004 0.008 0.080 0.087 0.009 0.012 0.140 0.156 0.170 0.181 0.040 0.063 nom max 5.21 5.44 5.60 0.205 0.214 0.220 h e 0.51 ref 0.020 ref d l1 h e on semiconductor and are registered trademarks of semiconductor components industries, llc (scillc). scillc reserves the right to mak e changes without further notice to any products herein. scillc makes no warranty, represent ation or guarantee regarding the suitability of its products for an y particular purpose, nor does scillc assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including wi thout limitation special, consequential or incidental damages. typical parameters which may be provided in scillc data sheets and/or specifications can and do vary in different application s and actual performance may vary over time. all operating parameters, including typicals must be validated for each customer application by customer's technical experts. scillc does not convey any license under its patent rights nor the rights of others. scillc products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the scillc product could create a sit uation where personal injury or death may occur. should buyer purchase or use scillc products for any such unintended or unauthorized application, buyer shall indemnify and hold scillc and its of ficers, employees, subsidiaries, af filiates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, direct ly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that scillc was negligent regarding the design or manufacture of the part. scillc is an equal opportunity/affirmative action employer. this literature is subject to all applicable copyright laws and is not for resale in any manner. publication ordering information n. american technical support : 800-282-9855 toll free ?usa/canada europe, middle east and africa technical support: ?phone: 421 33 790 2910 japan customer focus center ?phone: 81-3-5773-3850 mbrs2h100/d literature fulfillment : ?literature distribution center for on semiconductor ?p.o. box 5163, denver, colorado 80217 usa ? phone : 303-675-2175 or 800-344-3860 toll free usa/canada ? fax : 303-675-2176 or 800-344-3867 toll free usa/canada ? email : orderlit@onsemi.com on semiconductor website : www.onsemi.com order literature : http://www.onsemi.com/orderlit for additional information, please contact your local sales representative
|
